Date: June 8, 2011

Last Updated: May 7, 2012

Contributors:

Caitlin Tupper (2758 days ago)
Collin Peters (Unlicensed) (4201 days ago)
Marina Sovic (Deactivated) (4182 days ago)

Table Of Contents

Introduction

This document describes the Connector web service API. This document assumes you know what the Connector is and does not include an overview of it (please see “Connector – Overview.pdf”)

Important

This document describes the Connector API which is used for INCOMING data. That is data that is coming from your platform and going to other platforms, via the Connector. If the integration agreement that you have decided upon with InTouch is only for outgoing data (that is, your system only receives data) then this document does not apply. Please see the companion document "Connector Partner Integration Guide" for details on receiving data.

Notes

Currently (April 2012) there is no security (i.e. username/password) on the Connector web service API calls. This will obviously change soon but for now it is simply ‘security through obscurity’ in the sense that the GUIDs provide a level of security because they effectively cannot be guessed
Currently (April 2012) SSL/HTTPS does not exist on the Connector web service API calls. This will be added in the next release of the Connector
A Java library is available to communicate with Connector to ease your development should you be a Java shop
Our QA environment which you can use to develop against is http://qa.intouchfollowup.com/connector/api/2011-11/user. Note that before actual web service calls can be made, work must be done by InTouch in order to make it aware of your platform

General Info

The Connector is built on the concept of one fitness club (i.e. one physical location) belonging to one client. One client may have many clubs (i.e. a 10 location chain). All of the entities that the Connector works with (prospects, members, staff, lead sources) must belong to one client, and one club within that client. It is important to note that all communication with the Connector is done using the IDs from YOUR SYSTEM. While you can track the GUIDs that the Connector returns to you, you should not communicate with the Connector using these GUIDs. Think of this way, when you make a call to the Connector you are saying: I am 'PARTNER X', here is a prospect record that has the ID 123456 in my system, and it belongs to club 123 within the client 456.

All calls made to the Connector must include

Provider ID - Each 3rd party integrating with the Connector will be given a unique ID which identifies you
Client ID - As this is a multi-tenant system all requests must include the client ID.
Club ID - Each entity must belong to a club and as such the club ID is required
Record ID - The ID within your system that you are working with

Web Service API Calls

Users (prospects and members) - the Connector has one call to save all types of users (i.e. both prospects and members). There is a user_type field which is used to differentiate between the two.
Staff
Lead sources

Validation

The Connector is very forgiving with validation as it cannot be the lowest common denominator of all the systems being integrated. Imagine that the Connector was restrictive with validation and only allowed a maximum first name length of 20 characters. This would mean that every system receiving data from the Connector would only have a 20 character first name, even if all the integrated systems actually supported 40 characters! So the Connector only classifies 4 fields as mandatory (first name, last name, user type, user status), and is very open as to the lengths of these fields. Generally, it is assumed that data is validated before it gets sent to the Connector (for example, InTouch validates all data before sending anything to the Connector).

Working With User Records

URL: http://<domain>/connector/api/2011-11/user

Fields:

Name	Description	Details
<firstname>	First name	Mandatory
<lastname>	Last name	Mandatory
<userStatus>	The status of the user	Mandatory Must be ‘ACTIVE’ or ‘INACTIVE’
<userType>	The type of the user	Mandatory Must be ‘PROSPECT’ or ‘MEMBER’
<birthdate>	Date of birth	Must be yyyy-mm-dd format
<gender>	Gender	‘M’ or ‘F’
<address1>	First address field	TBD - Restrictions (max length, etc..)
<address2>	Second address field (not supported in InTouch)	TBD - Restrictions (max length, etc..) Note: Currently InTouch only has one address field
<city>	City	TBD - Restrictions (max length, etc..)
<zipcode>	Zip Code or Postal Code	TBD - Restrictions (max length, etc..)
<state>	State or Province	TBD - Restrictions (max length, etc..)
<country>	Country (2 digit ISO code)	As per http://en.wikipedia.org/wiki/ISO_country_codes
<mobile>	Mobile number	TBD - Restrictions (max length, etc..)
<email>	Email address	TBD - Restrictions (max length, etc..)
<homePhone>	Home phone number	TBD - Restrictions (max length, etc..)
<workPhone>	Work phone number	TBD - Restrictions (max length, etc..)
<company>	Company	TBD - Restrictions (max length, etc..)

Fetching User Records

Fetching a user record simply requires two attributes included in a GET call to the user web service. Example:

Request using GET

http://<domain>/connector/api/2011-11/user?provider=PROVIDER_ID?client_id=xxxx&club_id=xxxx&recordID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

Response

<user>
   <providerInfo>
      <identifier>PROVIDER_ID</identifier>
      <clientID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clientID>
      <clubID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clubID>
      <recordID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</recordID>
   </providerInfo>
   <userInfo>
      <firstname>Foo</firstname>
      <lastname>Bar</lastname>
      <birthdate>1972-03-12</birthdate>
      <gender>M</gender>
      <userStatus>ACTIVE</userStatus>
      <userType>PROSPECT</userType>
      <address1>1234 Fake St</address1>
      <address2>Apartment 1a</address2>
      <city>Spuzzum</city>
      <zipcode>12345</zipcode>
      <state>WA</state>
      <country>US</country>
      <mobile>555-555-5555</mobile>
      <email>foo@bar.com</email>
      <homePhone>555-666-6666</homePhone>
      <workPhone>555-777-7777</workPhone>
      <company>Acme Widgets</company>
      <createdBy>INTOUCH</createdBy>
      <createdDate>2012-04-10T04:11:07.023Z</createdDate>
      <modifiedBy>INTOUCH</modifiedBy>
      <modifiedDate>2012-04-10T04:11:07.023Z</modifiedDate>
   </userInfo>
</user>

Saving User Records

Here is a sample piece of XML which should be POST’ed to the user web service

Request

<user>
   <providerInfo>
      <identifier>PROVIDER_ID</identifier>
      <clientID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clientID>
      <clubID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clubID>
      <recordID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</recordID>
   </ providerInfo >
   <userInfo>
      <firstname>Foo</firstname>
      <lastname>Bar</lastname>
      <userStatus>ACTIVE</userStatus>
      <userType>PROSPECT</userType>
   </userInfo>
</user>

Details

The <user> tag needs to wrap the entire record
Note: Though shown as GUID/UUIDs, the values for the IDs (identifiers) can effectively be anything; it does not have to be a real GUID/UUID.
- Reminder: The value of the <recordID> tag is YOUR identifier. ALL communication with the Connector is done using your identifier.
The <providerInfo>tag provides all the information necessary for Connector to process the record. This includes
- <clientID>: The ID number of the client for this user record in the source provider (i.e. your system)
- <clubID>: The ID number of the location for this user record in the source provider.
- <recordID>: The ID number of the user in the source provider
- <identifier>: This is a set identifier which will be used to know who sent the record (i.e. the provider). This value will be given to you and must be sent for every web service call
The <userInfo> tag provides all the details for the actual user. Please see the user fields table for full details.

Result

The following XML is returned from a save call

Response

<response xmlns="http://www.intouchfollowup.com/api/2011-11">
   <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
</response>

The return value contains a <response> element which contains the UUID of the record within the Connector. Note: Though you may save this ID in your system it is not necessary as all communication with the Connector is done using your own identifiers

Saving Lead Data

For prospects, the Connector allows you to pass in a lead (aka opportunity) owner, as well as a lead source. The request looks like

<user>
   <providerInfo ... snipped for brevity />
   <userInfo ... snipped for brevity />
   <leadInfo>
      <leadSource>FACEBOOK</leadSource>
      <ownerID>6b85b27e-5028-4b23-a1e2-f3aa5bf3909b</ownerID>
   </leadInfo>
</user>

Note that the <leadInfo> section is optional, and that the <leadSource> and <ownerID> fields can either both be set, or just one of them can be set. If your system does not support staff, or lead sources, then these can be ignored
The ID values for the staff owner and lead source are again, the ID values from your system.

Staff Are Users Too

The Connector supports the saving of staff as well. The staff web service has a different URL but is syntactically identical to the user web service with the exception that the <userType> element must be STAFF.

Staff Web Service URL

http://<domain>/connector/api/2011-11/staff

Lead Sources

The Connector supports lead sources as well.

Lead Web Service URL

http://<domain>/connector/api/2011-11/leadsource

Save Lead Source

Request

<leadSource>
   <providerInfo>
      <identifier>PROVIDER_ID</identifier>
      <clientID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clientID>
      <clubID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</clubID>
      <recordID>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</recordID>
   </providerInfo>
   <leadInfo>
      <name>Facebook</name>
      <active>true</active>
   </leadInfo>
</leadSource>

Response

<response xmlns="http://www.intouchfollowup.com/api/2011-11">
   <uuid>cf912bbd-7d10-41a5-b37e-1e11beff4e0c</uuid>
</response>

Fetch Single Lead Source

Request

http://<domain>/connector/api/2011-11/leadsource?provider=INTOUCH&client_id=1111&club_id=11111111-1111-1111-1111-111111111111&identifier=FACEBOOK

Response

<leadSource>
   <providerInfo>
      <identifier>INTOUCH</identifier>
      <clientID>1111</clientID>
      <clubID>11111111-1111-1111-1111-111111111111</clubID>
      <recordID>FACEBOOK</recordID>
   </providerInfo>
   <leadInfo>
      <createdBy>INTOUCH</createdBy>
      <createdDate>2012-04-17T21:58:47.758Z</createdDate>
      <modifiedBy>INTOUCH</modifiedBy>
      <modifiedDate>2012-04-17T21:59:29.673Z</modifiedDate>
      <name>Facebook</name>
      <active>true</active>
   </leadInfo>
</leadSource>

Fetch Lead Sources

Sample URL

http://<domain>/connector/api/2011-11/leadsource?provider=INTOUCH&client_id=1111&club_id=11111111-1111-1111-1111-111111111111

Response

 <leadSources>
   <leadSource>
      <createdBy>INTOUCH</createdBy>
      <createdDate>2012-04-17T21:58:47.758Z</createdDate>
      <modifiedBy>INTOUCH</modifiedBy>
      <modifiedDate>2012-04-17T21:59:29.673Z</modifiedDate>
      <name>Facebook</name>
      <active>true</active>
   </leadSource>
   <leadSource>
      <createdBy>INTOUCH</createdBy>
      <createdDate>2012-04-17T21:58:47.758Z</createdDate>
      <modifiedBy>INTOUCH</modifiedBy>
      <modifiedDate>2012-04-17T21:59:29.673Z</modifiedDate>
      <name>Corporate</name>
      <active>true</active>
   </leadSource>
</leadSources>

Errors

The Connector is build using ReSTful style web services, which is simply regular old HTTP. This means that if you make a request to fetch a user and that user isn’t found you will actually get an HTTP response status of 404 'Not Found'. Similarly, if any type of error occurrs in the backend, an HTTP response code in the 400-599 range will be returned (these are the error codes).

In regards to real errors: from a high level this type of error should be returned depending on what has happened

Sample error XML

<error xmlns="http://www.intouchfollowup.com/api/2011-11">
   <reason>UNKNOWN</reason>
   <errorUUID>cecfeef8-24ef-4107-8d8b-534ce6a999b8</errorUUID>
   <message>additional error details</message>
</error>

Details

<reason>: will be an identifier that will try to narrow down the type of error. Will show ‘UNKNOWN’ if the error type isn’t known. Current examples are: ‘VALIDATION’, ‘DATABASE’
<errorUUID>: This is a regular old UUID which you can pass on to InTouch support which will simply let us have an easy way to find the error in the Connector logs
<message>: the actual details of the error. Note that currently this is just the stack trace from the real error in the backend so some errors might be cryptic

3. API Guide

Introduction

Notes

General Info

Web Service API Calls

Validation

Working With User Records

Fetching User Records

Saving User Records

Details

Saving Lead Data

Staff Are Users Too

Lead Sources

Save Lead Source

Fetch Single Lead Source

Fetch Lead Sources

Errors

Details